One of the areas of the ultralight backpacking market that has long been underserved are lightweight (3-4 pound) durable backpacks for heavy loads exceeding 40 pounds and ranging up to 60, 70, or 80 pounds or more. Built using modern lightweight yet durable fabrics, with more streamlined UL-style designs, such packs would be ideal for backpackers, climbers, and guides wanting to take longer trips into less developed wilderness areas with limited resupply options.
There’s actually a growing audience for packs of this type, particularly among backpackers who’ve been schooled in ultralight backpacking techniques but are ready to move onto expedition-style adventures that require carrying additional gear such as packrafts, bear canisters, climbing gear, and even hunting equipment. While some attempts have been made by UL pack manufacturers to address this market by developing higher capacity packs with high-tech materials, those attempts have largely failed because they have shied away from adding more robust frames to their packs. Heavy loads require a frame. Period.
It’s not surprising then that Seek Outside, a gear manufacturer with roots in the hunting community is beginning to develop a following among lightweight backpackers who need to carry much heavier loads in the 40-80 pound range and higher. Seek Outside has succeeded in combining a streamlined pack bag made out of bomb-proof high-tech fabric (X-Pac) with an adjustable external frame suspension system capable of carrying heavy loads comfortably with their Unaweep line of backpacks.
I’ve been testing one of Seek Outside’s packs, a Unaweep 3900 for the past two months, and I’m very impressed with its lightweight (just over 3 pounds), durability in brutal off-trail conditions, and comfort when carrying 40-55 pound loads. With a few tweaks, this hunting-inspired pack has the potential to satisfy the needs of a broad segment of backpackers and guides who need to carry more gear and supplies but aren’t willing to carry an overbuilt 8-9 pound backpack to get the job done.
I doubly excited because Seek Outside is making changes to the Unaweep design to make it more palatable to a backpacking audience and open to suggestions about how to modify the Unaweep design to address a non-hunting audience’s needs. I have been looking for a multi-day off-trail backpack that has many of the properties of the Unaweep 3900 for a long time and I think that Seek Outside has a good shot at satisfying my needs with a few minor modifications.
Storage and Organization
For purposes of description, the Unaweep has three separate but integrated components: the frame (including shoulder straps and hip belt), a pack bag which is permanently attached to the frame, and an external pocket, called a Talon, which attached to the main pack bag using compression straps.
The red pack bag (above) is nothing fancy. It’s a big sack with a roll-top closure. The seams aren’t sealed with seam tape (so it’s not waterproof) and there isn’t an internal hydration pocket or hydration ports. The only functional elements on the pack bag are two water bottle pockets with bottom drainage ports. The water bottle pockets have cord-locks around the top rim that provide some compression to hold bottles in place, but that’s it. The hip belt and compression straps are attached to the frame but not the pack bag, unlike many internal frame or ultralight backpacks.
The roll-top closure provides vertical compression on the contents of the pack bag but the ends of the roll-top connect to one another instead of being tucked away along the sides of the pack bag. This caused me some concern because I bushwhack a lot and feared that the resulting loop would catch on vegetation but that has never occurred. The top of the pack bag is further secured with an external Y strap that runs over the top of the pack bag and can also be used to attach gear to the outside of the pack.
Despite being an external frame pack, you pack the Unaweep the same way you would any internal frame pack, with the heaviest items as close to your back and core muscles as possible. That means you’d probably put your sleeping bag in first on the bottom, followed by your sleepwear, then your longer-term food (heavy), and so on like you’d normally pack an internal frame backpack. You want to avoid packing very heavy items toward the top of the pack because the external frame noticeably increases the efficiency of rotation when you lose your balance. I made this mistake on an off-trail hike with a heavy pack and did a few face plants before I reorganized the distribution of weight in my backpack.
Every Unaweep 3900 comes with a Talon pocket that attaches to the pack with eight compression straps, three on each side and two at the bottom. The Base Talon (1000 ci/ 16.4 L ) has a side zipper running down its length and provides short-term storage for items that you want during the day so you don’t have to open the roll-top pack bag. I carry my water filter, Aqua Mira, and day time snacks in mine, along with a full three-liter hydration reservoir when I need to carry extra water to a dry camp. Unfortunately, the Talon doesn’t have drain holes to help drain a wet filter, but then again the water doesn’t have a chance to soak into the main pack bag because the Talon is its own separate compartment.
As you can imagine, the Talon also provides an excellent way to attach gear to the outside of your backpack, such as snowshoes, if you sandwich them between the Talon and the pack body. There’s a built-in load shelf permanently attached to the bottom of the frame to facilitate this type of carriage, really just a piece of fabric attached to the bottom of the pack frame and on the other end to the Talon by webbing straps. You can even stack up gear horizontally, like a tent or a z-lite pad, and so on.
If you decide you want to discard the Talon, the load shelf and it’s two webbing straps will flap annoyingly below the frame. While you could simply cut the load shelf off (an irreversible modification), you can preserve its functionality by connecting the webbing straps to the middle tier of side compression straps on the pack body. It’s a sloppy solution though because it creates two long pieces of webbing on the exterior of the pack that are easy to catch on passing vegetation. Hiking without a Talon also eliminates any easily accessible external storage on the Unaweep, forcing you to stop and open the packbag to access and stow gear or food, something I would find undesirable because of its negative impact on transition times.
The Unaweep 3900 pack bag is available in a number of different fabrics and there are different function-specific Talons that you can choose depending on your needs. The red pack shown here is made with a 70 denier (a measure of thickness) waterproof fabric called VX07 X-Pac and the black fabric on the Talon is a 420 denier fabric called VX42. Originally developed for sailcloth, X-Pac fabric is tear-resistant, waterproof, and has a multi-layer construction which gives it a very good structural stability. It can also be sewn.
While I haven’t experienced any durability issues with the VX07 on the red pack, Seek Outside has since switched to making the Unaweep 3900 out of even more durable grades of VX21, and VX42 because they add substantially more durability against rock and talus abrasion. Seek Outside also offers other grades of X-Pac including VX07 and VX33, in addition to less durable but lighter weight Dyneema Fiber, although this adds to the time required to sew a custom pack.
If you are interested in buying a pack from Seek Outside, I recommend you call them to place your order rather than making a selection on their website, if only to make sure you understand what you are buying and its weight/performance tradeoffs. The company is also a cottage manufacturer that makes gear to order, so you really need to do your homework to make sure you’re ordering what you want.
Backpack Frame and Suspension System
The Unaweep 3900 is an adjustable external frame backpack made out of 6061 aluminum tubing which is curved to hug your back, making it more like an internal frame pack than a mainstream external frame pack like the Kelty Trekker or an Alps Mountaineering Bryce external frame pack where the frame extends beyond the bottom of the pack bag. There’s minimal padding on the frame at mid-back level to promote airflow so your sweat can dry, but this is marginally effective in hot weather because the pack rides so close to the back of your body.
The length of the torso is adjustable using a very simple webbing system that raises or lowers the height of the shoulder yoke using webbing straps attached to the piece of fabric that spans the frame at mid-back. It’s also very easy to adjust while wearing the backpack: simply shoulder the pack, tighten the hip belt, then adjust two ladderlocks on the frame (inside the load lifter straps) to allow the shoulder harness to rise to the point where the top of the harness is near C7 – the pointy vertebrae at the top of your back. (click for video instructions). This enables the Unaweep to be adjusted for torso lengths ranging from 15.5″ to 22″ (frame extenders are also available for longer torsos).
The remainder of the shoulder strap system is quite simple with moderately padded shoulders straps and load lifters attached to the top of the frame. The sternum strap does not have a whistle and outside of the straps are devoid of any daisy chains or external attachment points for hanging a camera or GPS pocket.
The hip belt is literally bolted to the frame using locking nuts that attach along the frame the bottom near the sidebars. While crude looking, the Unaweep hip belt provides an amazingly efficient load to hip transfer, something everyone who tries on this pack comments on immediately. The effectiveness of the suspension under load is due to the fact that the hip belt is attached to the frame directly, a principle that is well understood by pack makers, but not often used in packs developed to carry lighter loads where a real frame is unnecessary.
Comparable External Frame Backpacking Packs
The hip belt is 6 inches wide increasing the surface area over which weight can be distributed and helps prevent the belt from sliding down, particularly for men who have squarish hips where this is a problem. It also uses a Scherer-style cinch with pull forward webbing that provides a mechanical advantage when tightening the hip belt (I recently became friends with the designer who invented this feature when he worked for Kelty, Michael Cecot-Scherer at TheTentLab.com)
Areas for Improvement
I really like the Seek Outside Unaweep 3900 and I’ve seriously considered buying one for my personal use. The load to hip transfer provided by the external frame is phenomenal and the tubular frame leads to much better postural alignment and hiking efficiency in rugged conditions. While Seek Outside has moved away from offering the VX07 fabric used in this loaner pack, I’ve found it to be extremely durable for off-trail bushwhacking in dense spruce that tends to slice through the fabric and mesh of UL backpacks like butter. Coupled with its lightweight (just over 3 pounds), these attributes make the Unaweep a very appealing backpack for my needs.
But the fact remains that the Unaweep and Seek Outside’s other packs were originally designed for hunters and not off-trail backpackers. If you decide to take the plunge with the current Unaweep model there, are a few details that you want to know about the pack (none of which are showstoppers – but can be annoying), including modifications that Seek Outside plans to make to the pack that is designed with backpackers’ needs in mind.
- Seek Outside plans to offer a version of the Unaweep without an external Talon pocket, replacing it with a front pocket sewn into the pack body. UL backpackers who prefer having a pocket like this will appreciate this option.
- The shoulder straps on the Unaweep don’t have extra attachment points for hanging gear such as map cases, cameras or GPS units. Seek Outside will sew extra daisy chains onto the shoulder straps as a customization or you can add your own attachments points using tri-glides.
- The hip belt webbing buckles have a tendency to fall off the webbing because the ends aren’t folded over and sewn together. Many of Seek Outside’s packs are made to order – so be sure to request this or do it yourself. Losing a hip-belt buckle in dense woods would be disastrous.
- The side water bottle pockets aren’t big enough to fit two, one-liter soda bottles side-by-side and should be made taller so the bottles don’t pop out so easily.
- The bottom compression strap should also be raised slightly higher above the water pocket so it can be used to secure tall objects in the side water bottle pockets to the sides of the pack bag.
- The hip belt and shoulder straps are lined with black spacer mesh with picks up spruce needles and duff on off-trail hikes.
- Exceptional load to hip transfer. Carries wonderfully with higher weights of 40 pounds and up.
- Easy to adjust torso length system
- Durable fabric and solid water bottle pockets (not mesh)
- No torso collapse with heavy loads
- The wide hip belt is comfortable and doesn’t slip under load
- Slow transition times because you need to unbuckle Y strap and roll-top to access gear
- Water bottle pockets are too low, so bottles pop out of them. Cordlock system is awkward to use while wearing the pack.
- difficult to fit two 1 liter bottle in water bottle pockets
- Lack of attachment points on shoulder straps
- Weight of reviewed pack: VX07 with base Talon: 3 lbs 3.7 ounces, without Base Talon 2 lbs 14 ounces
- Fabric choices:
- VX21 with Base Talon 3 lbs 2 ounces, without Base Talon 2 lbs 12 ounces
- X33 weights are comparable
- Cuben 2.92 saves 8 ounces with pack bag and talon (2lbs 10 ounces)
- VX42 adds 4 ounces complete
- The adjustable frame fits torsos sized 15.5″ to 22″. Frame extenders are available for people with even longer torsos.
- Hip belt sizes
- Small: 29-32″ waist
- Medium: 32-36″ waist
- Large: 36-40″ waist
- Pack bag volume: 3900 cubic inches, roll-top closure
- Talons: Multiple options available (see website). Base Talon has a volume of 1000 cubic inches.
- Standard features:
- Pack bag roll-top closure
- Two side water bottle pockets
- Three tiers of side compression straps
- Base Talon with integrated load shelf
- Easy to adjust torso length
- Load lifter straps
- Sternum strap
- Dual ice axe loops
- Webbing loops on hip belt
- White pack interior for better visibility
- Customization options:
- Side access zipper on main pack bag
- Hydration ports
- Call for other requests
- Bear canister compatibility
- Garcia Bear Canister
- Bear Vault BV500
- compatible with pocketed lid (purchased separately)
- compatible with Gun Hook (purchased separately)
Disclosure: Seek Outside loaned Philip Werner (SectionHiker.com) a Unaweep 3900 backpack for this review.
Editor’s note: If you’re thinking about buying gear that we’ve reviewed or recommend on SectionHiker, you can help support us in the process. Just click on any of the seller links above, and if you make a purchase, we may (but not always) receive a small percentage of the transaction. The cost of the product is the same to you but this helps us continue to test and write unsponsored and independent gear reviews, beginner FAQs, and free hiking guides. Thanks and we appreciate your support!